TYCOONS WORLDWIDE GROUP (THAILAND) PUBLIC CO.,LTD.SET: TYCN🇹🇭 TH

Business Operation · 2025

Corporate Information

Company Name

TYCOONS WORLDWIDE GROUP (THAILAND) PUBLIC CO.,LTD.

Telephone

0-3365-8558

Website

www.tycons.com

Email

tycoons@tycons.com

Dividend Policy

Dividend Policy

The dividend payment policy of the company is that dividends will be paid at a rate of no less than 40 percent of the Company’s net profit after corporate income tax each year. However, many factors must be taking into consideration before deciding to pay a dividend, including operation results and financial status, the company’s liquidity, business expansion and other factors related to management of the company. In order to pay a dividend, such payment must be agreed upon at a shareholders meeting with consent of the company’s board of directors.

If there is any profit after the final accounts of such financial year, the company may allocate the profits in the following orders, provided that the company shall first apply such profits to pay off its tax payment then compensate for its accumulated losses:

  1. (1)Set five percent of the remaining profits as reserve fund.

    1. (2)Upon properly reserving the fund for reserve fund, set one percent of the remainder of the profits as directors’ bonus.

    2. (3)Upon properly reserving the fund for reserve fund, the employees’bonus shall be set in the range between two to five percent of the remainder of the profits.

    3. (4)After the funds for items 1 to 3 are properly reserved, at least forty percent of the remainder of the profits plus the accumulated and undivided profits of previous year shall be set as dividends (deductingthe distributed interim dividends). The dividends to be distributed in the form of cash shall not be less than fifty percent of the distributable dividends. No distribution shall be allowed if divided per share is less than THB 0.2.

Historical Dividend Payments

This YearLast Year2 Years Ago3 Years Ago4 Years AgoMetricDescription
0.22-0.470.230.270.63Net profit per share (Baht : Share)Net profit per share (baht : share)
00000Dividend per share (Baht : Share)Dividend per share (baht : share)
00000Dividend stock ratio (Number of original shares: dividend shares)Ratio of stock dividend payment (existing share : stock dividend)
00000Dividend share value per share (Baht : Share)Value of stock dividend per share (baht : share)
00000Total dividend payment value (Baht : Share)Total dividend payment (baht : share)
00000Dividend payout ratio to net profit (%)Dividend payout ratio compared to net profit (%)

Major Shareholders

Introduction

List of major shareholder groups (list of shareholders holding more than 0.5%) appearing in the shareholder register as of March 18, 2025.

Major Shareholders

No.NameShares% Shares
18,437TYCOONS GROUP ENTERPRISE CO.,LTD.180,470,47730.24
18,726PURPLE METAL CO., LTD.147,197,63624.67
18,727PROSPER STEEL CO., LTD.91,742,97915.37
18,729CITI (NOMINEES) LIMITED-FIRST COMMERCIAL BANK-TDR60,000,00010.05
18,730THAI NVDR COMPANY LIMITED20,228,7823.39
18,731BANQUE PICTET & CIE SA18,176,3003.05
18,732MR.JAMROEN RUNGWATTANASET12,200,0002.04
18,734MISS.SARAWALEE PRASERT6,754,5871.13
18,737MR.WATCHARA PANJAWATTANA3,124,2000.52

Business Strategies Overview

Chairman's Message

Tycoons Group's ability to secure stable upstream raw material sources, stemming from its close relationship with TY Steel Limited's electric furnace smelting plant, provides a competitive advantage through enhanced raw material stability. Recent geopolitical tensions between the United States and Iran have increased global energy and transportation costs, while China's export controls on steel have led to a potential price recovery and rise in the overall industry chain. The company will leverage its strategic planning in Thailand, ASEAN, and China, implementing automation in its production lines and promoting a circular economy approach to continuously reduce costs, enhance competitiveness, and improve resilience to changing circumstances. Looking ahead, the company will focus on diversifying its product range and continuously seeking cost-reduction strategies to maintain its competitiveness in the steel industry. It will also improve operational efficiency, adhering to a philosophy of innovation, willingness to embrace change, and continuous self-improvement to respond to rapidly evolving market conditions, maximize profits, and distribute returns to shareholders.

Vision

  • It uses Thailand as its main production base and expands its upstream steel production business in accordance with the policies of its affiliated companies to strengthen cooperation in production management and operations among the involved companies.

  • The company has continuously built a reputation in the steel manufacturing business, being a leader in the production, distribution, and service of wire rod, reinforcing steel bars, and steel wire products in Thailand.

  • The company has gained extensive recognition and built a reputation in the fastener manufacturing business in the international market, specializing in the production, distribution, and service of screws, bolts, and threaded rods.

  • It prioritizes environmental preservation, is responsible towards the community, practices good corporate governance, and considers stakeholders to ensure sustainable business operations indefinitely.

Objectives

Operate the steel industry business sustainably and compete effectively in the market.

Goals

  • Keep raising product quality, improving efficiency, and lowering production

    cost. Produce and sell pricecompetitive steel products which meets customers’ demand.

  • Obey environmental policy, well utilize resources, minimize pollutions, and properly dispose waste in accordance with environmental regulations.

  • Care for social responsibility and make both TYCN and the community everlasting.

Business Strategies

Vertical integration, focus on cost down, catch customer requirements for products indeed, and constantly innovative ideas, raise the bar for ourselves.

Material Changes & Developments

Material Changes & Developments

YearDescription
2,024

Green Engineering Holding Co., Ltd.

During the first quarter of 2024, Green Engineering Holding Co., Ltd. called for an additional payment of 30% of the total shares, and the Company made full payment for the shares, totaling Baht 49 million, in accordance with its shareholding proportion.

Moreover, during the first quarter of 2024, Green Engineering Holding Co., Ltd. invested in the 1,500,000 ordinary shares of Siam PC Products Co., Ltd. at the price of Baht 100 per share, and the company made full payment amounting to Baht 150 million (representing 76% of the registered share capital). Siam PC Products Co., Ltd. is primarily engaged in manufacture and distribution of PC strand.

On 29 April 2024, Siam PC Products Co., Ltd. increased its registered share capital from Baht 198 million (1,982,000 ordinary shares with a par value of Baht 100 per share) to Baht 250 million (2,500,000 ordinary shares with a par value of Baht 100 per share). Green Engineering Holding Co., Ltd. did not make an additional investment in the newly issued ordinary shares. As a result, the shareholding percentage in this company decreased from 76% to 60%.

On 8 October 2024, the Extraordinary General Meeting of Shareholders of Siam PC Products Co., Ltd. passed a resolution approving the acquisition of 5,100 ordinary shares of Mega Import-Export Company Limited at the price of Baht 400 per share, and the full payment was made amounting to Baht 2 million (representing 51% of the registered share capital). Mega Import-Export Company Limited is primarily engaged in importing and exporting rebar, wire rods, steel plates, and steel of various sizes.

2,025

Green Engineering Holding Co., Ltd.

During the current year, Green Engineering Holding Co., Ltd. called for an additional payment of 25% of the total shares, and the Company made full payment for the shares, totaling Baht 41 million in accordance with its shareholding percentage.

On 7 October 2025, Siam PC Products Co., Ltd. increased its registered share capital from Baht 250 million (2,500,000 ordinary shares with a par value of Baht 100 per share) to Baht 290 million (2,900,000 ordinary shares with a par value of Baht 100 per share).Green Engineering Holding Co., Ltd. invested in 240,000 newly issued ordinary shares totaling Baht 24 million, in accordance with its shareholding percentage and made full payment.

On 10 October 2025, Green Engineering Holding Co., Ltd. and Siam PC Products Co., Ltd. invested in ordinary shares of Saiyai Kaew Steelwire Co., Ltd., acquiring 147,500 shares and 560,000 shares, respectively, from existing shareholders. The total investments amounted to no more than Baht 55 million (representing 18.44% and 70% of the registered share capital, respectively). Both subsidiaries made payments of Baht 33 million in October 2025, and the remaining balance of Baht 22 million is expected to be paid within 2026, in accordance with the terms specified in the agreement.

On 26 November 2025, Green Engineering Holding Co., Ltd. additionally invested in ordinary shares of Saiyai Kaew Steelwire Co., Ltd., acquiring 92,500 shares from existing shareholders. The total investments amounted to Baht 3 million (representing 12% of the registered share capital), and the subsidiary made full payment for the shares. As a result, the shareholding percentage in this company increased from 18.44% to 30%.

Use of Proceeds from Securities Offerings

Is There Money Raised from a Securities Offering Still to Report On?

No

Commitments Made in the Registration Statement

Are There Commitments or Conditions from an Offering or Listing?

No

Group Operating-Structure Policy

Description

The company has established an investment policy for businesses with a vision and growth plan within the group, which will enable its subsidiaries to operate more efficiently or generate higher profits, or invest in businesses that create synergy to enhance the group's competitive capabilities and lead to achieving the goal of becoming a leader in the core businesses of the group's subsidiaries.

Therefore, the company may consider investing in businesses in other sectors if such businesses have business growth potential or are beneficial to the group's businesses and can generate good investment returns. The company will consider the risks, expected returns, and financial status of the company before making an investment decision. Such investments must be approved by a resolution of the Board of Directors, the Executive Committee, or the General Meeting of Shareholders (if applicable under relevant legal requirements).

Companies Where the Company Holds ≥10%

Companies (≥10% Holding)

Company NameAddressProvinceZip CodeTelephoneFaxBusiness TypeSecurity TypeSharesPaid-up Shares
K.D.B. Company Limited (KDB)No. 98/245, Moo 9, Bang Kaeo Sub-district, Bang Phli DistrictSamut Prakarn10540-Engaged in real estate businessCommon shares269,636269,636
Green Engineering Holding Company LimitedNo. 99, Moo 1, Nikhom Phatthana Sub-district, Nikhom Phatthana DistrictRayong21180033-658558For the purpose of operating a business involving the acquisition of land and shares of other companies, with a focus on carbon credit-related businesses, research and development, and creating advantages for the company in carbon emission reduction, carbon tax, and carbon credits.Common shares300,000240,000
Fastbolt International Pte. Ltd.10 ANSON ROAD, #23-05, INTERNATIONAL PLAZA, SINGAPORE 079903Foreign country-TRADING COMPANYCommon shares9,600,0009,600,000
TY Steel Company Limited99/8 Moo 1, Nikhom Phatthana Sub-district, Nikhom Phatthana DistrictRayong21180+66 33 017928Is a manufacturer and distributor of steel billets and reinforcing steel bars.Common shares68,112,30068,112,300
Siam PC Products Company LimitedNo. 289, Moo 10, Nong Hiang Sub-district, Phanat Nikhom DistrictChonburi20140038-195171,038-195129038-111429Manufacture and distribute steel wire and prestressing steel strand, and other related products.Common shares310,000290,000
Mega Import-Export Company LimitedNo. 289, Moo 10, Nong Hiang Sub-district, Phanat Nikhom DistrictChonburi20140038-195171,038-195129038-111429Import and distribute wire rod, steel wire, and twisted strands for prestressed concrete and other related products.Common shares10,00010,000
Fiberglass Steel Wire Company LimitedNo. 36, 36/1-2, Moo 10, Sai Yai Sub-district, Sai Noi DistrictNonthaburi1115002-1217457Manufacture and distribute high-tensile steel wire and all types of industrial wire.Common shares800,000800,000

Shareholders with Potential Conflict of Interest

Has Potential-Conflict Shareholder (Y/N)

Yes

Relationships Among Major Shareholders

Relationship Exists (Y/N)

Yes

Description

The Company management and operation of TGE and TYCN are clearly separated, and the two management teams are independent each other, in order that each company is acting in its own best interests.

Shareholders' Agreement

Agreement Exists (Y/N)

No

Shareholding Diagram (Group Structure)

Does the company hold shares in other companies?

Yes

Subsidiaries

Company NameJuristic Persons / Holders
KDB Co., Ltd TYCOONS WORLDWIDE GROUP (THAILAND) PUBLIC CO.,LTD. · Voting rights percent: 44.99 · Shareholding proportion percent: 44.99
Green Engineering Holding Co., LtdTYCOONS WORLDWIDE GROUP (THAILAND) PUBLIC CO.,LTD. · Voting rights percent: 54.9 · Shareholding proportion percent: 54.99

Associated Companies

Company NameJuristic Persons / Holders
Fastbolt International Pte. Ltd.TYCOONS WORLDWIDE GROUP (THAILAND) PUBLIC CO.,LTD. · Voting rights percent: 47.47 · Shareholding proportion percent: 47.47

Income Structure

Product / Service Income

CategoryDescriptionThis YearThis Year %Last YearLast Year %2 Years Ago2 Years Ago %
Total revenue from operationsTotal revenue from operations5,752,0001004,248,0001005,575,000100
Wire rod2,595,00045.111,632,00038.422,808,00050.37
Fastener1,664,00028.931,817,00042.772,222,00039.86
Annealed wire397,0006.9438,00010.31484,0008.68
PC strand282,0004.9115,0002.7100
PC Wire29,0000.50000
OtherOther785,00013.65246,0005.7961,0001.09

Export Income

CategoryDescriptionThis YearThis Year %Last YearLast Year %2 Years Ago2 Years Ago %
Total revenueTotal revenue from operations5,752,0001004,248,0001005,575,000100
DomesticDomestic3,867,00067.232,233,00052.572,482,00044.52
InternationalInternational1,883,00032.742,015,00047.433,093,00055.48
GermanyGermany164,0008.71985,00048.881,170,00037.83
United KingdomUnited Kingdom0011,0000.5510,0000.32
PolandPoland11,1000.59139,0006.9320,00010.35
TaiwanTaiwan000059,0001.91
United Arab EmiratesUnited Arab Emirates33,7661.79112,8735.680,4352.6
Other countriesOther countries1,674,13488.91767,12738.071,453,56547

Other Income

Operating Other IncomeNon-Operating Other IncomeShare of Profit
1710 · As of year: 110379.0 · Description: Total other income · As of yesteryear: 24942.0 · As of year before yesteryear: 67607.0 · 1711 · As of year: 0.0 · Description: Other income from operations · As of yesteryear: 0.0 · As of year before yesteryear: 0.01712 · As of year: 110379.0 · Description: Other income not from operations · As of yesteryear: 24942.0 · As of year before yesteryear: 67607.01713 · As of year: 7732.0 · Description: Share of profit · As of yesteryear: 12728.0 · As of year before yesteryear: 139554.0

Product / Service Characteristics

Business Type

3114

Business Groups

Business GroupDescription
1) Wire Rods (Reinforcing bars)
  • Wire Rods in Coil:

Wire rods in coil, with outer diameter 1250mm and inner diameter 850mm, are made of billets through the process of hot rolling to bars (diameter from 5.5mm to16mm), coiling and strapping.

  • Bars in Coil:

Bars in coil, also named as BIC, with outer diameter 1400mm and inner diameter 1100mm, are made of billets through the process of hot rolling to bars (diameter from 17mm to 42mm), coiling and strapping. The company produces low-carbon wire rods in accordance with TISI no.348- 2540, while produces high-carbon wire rods in accordance

with TISI no.349-2548.

  • Deformed Bars

Deformed Bars are the product with transverse ribs, longitudinal ribs or gaps on its surfaces, which reinforce the pull strength between deformed bars and concrete. Specifications of Deformed bar product are DB6, DB8, DB10, DB12, DB16, DB20 and DB25 under Thai SD40 & SD50. Straight deformed bars, are made of billets through hot rolling and flying shears size 10 to 12 meter.

  • Round Bars

Round bars are made of bars with smooth surface through coiling and strapping. (Specifications are RB6-RB25).

2) Annealed Wires

Annealed wires are either finished or semi-finished products which are made of wire rods through complete or partial processes of intermediate drawing, spheroidizing, pickling and coating, and skin-pass. Annealed wires are classified into:

  • Small size annealed wires with diameter no more than 5.5mm.

  • Big size annealed wires with diameter from 5.5mm. to 29mm.

3) Fasteners
  • Screws

Screws are made of small size annealed wires through head forming, thread rolling, heat treatment, and surface treatment. Screws can be used together with rivets to fasten multiple parts.

  • Bolts

Bolts are made of big size annealed wires through head forming, thread rolling, heat treatment, and surface treatment. Bolts can be used together with nuts and washers to fasten multiple parts.

  • Thread rods

Thread rods are made of wire rods through cutting, thread rolling, and surface treatment. Thread rods can be used together with nuts and washers to fasten multiple parts.

4) Steel Wires Strands
  • PC Strands

PC Strands is made from continuous welding-free coils of high carbon wire rod. The weight could be from 2.5-3.5 Mt. The strand lis designed for mega infrastructures, such as pre-cast, bridge girders, ground anchors and other post tensioning systems.

Research & Development

Has R&D Policy (Y/N)

No

R&D Cost — Description

none

R&D Cost — Label

Research and development (R&D) expenses over the past 3 years (Million Baht)

R&D Cost — This Year

0.0

R&D Cost — Last Year

0.0

R&D Cost — 2 Years Ago

0.0

Assets Used in the Business

Permanent Assets — Description

The Company's assets are land, buildings, factories, machines, tools and equipment, Office equipment and vehicles. Core assets of TYCN as at December 31, 2024 – 2025.

Asset

Proprietary right/ Ownership

2024Total Value (MB)

2025 Total Value (MB)

  1. Land and land improvement

Ownership

616.84

648.13

  1. Buildings and attached facilities

Ownership

366.83

331.11

  1. Machinery and equipment

Ownership

1,477.96

1,557.27

  1. Transportation & Vehicle

Ownership

17.82

13.14

  1. Furniture and fittings

Ownership

8.84

7.72

Intangible Assets — Description

none

Has Subsidiaries Investment Policy (Y/N)

Yes

Subsidiaries Investment Policy — Description

Investment Policy in Subsidiaries and Related Companies

The Company has formulated an external investment policy in accordance with the group's vision and growth plan, which will enable the group’s Company to have higher operating efficiency or profit, or invest in businesses that creates benefits (Synergy) to increase the Company's competitiveness and lead to the success of the goal to be a leader in the Company's core business industry.

Therefore, the Company may consider investing in other sectors. If the business has potential for business growth or it is beneficial to the business of the Company in the group's Company and can generate a good return on investment. The Company will consider the expected risks and returns and the Company's financial position before making an investment decision. The investment must be approved by the Board of Directors' resolution. Board of Directors or the general meeting of shareholders (If it meets the requirements).

Marketing Policy & Competition

Reporting Mode

3117

Marketing Policy (Overall)

1. Wire Rod & Deformed Bar: Compliance Differentiation & Cost Defense

In the face of low-priced imports, the strategy focuses on "Trust" and "Service Extension."

  • TISI Brand Positioning:Heavily promote the fact that our products fully comply with Thailand Industrial Standards (TISI). Create "Compliance vs. Illegal Steel Risk" guides to educate customers on the legal risks and structural safety hazards of purchasing non-compliant steel.

  • Agile Supply Chain Services:Since competing on price is difficult, leverage local production to offer JIT (Just-in-Time) deliveryr small-batch flexible orders. Help customers reduce inventory costs to differentiate from long-lead-time, low-priced imports.

    2. Wire: Ecosystem Integration

For the influx of Chinese fastener manufacturers in Thailand, the focus is on "Localization Advantages."

  • Door-to-Door Technical Support:Provide localized technical consultation (in Mandarin/Thai) specifically for relocated Chinese firms to reduce their technical friction when switching suppliers.

  • Strategic Partnership Agreements:Utilize geographic proximity to sign VMI (Vendor Managed Inventory)r long-term supply contracts, embedding our wire products directly into the clients' production workflows to create high switching costs.

    3. Fasteners: Green Premium & Targeted Exporting

As the primary growth engine for 2026, the strategy emphasizes "Trade Hedging" and "Environmental Dominance."

  • EU-Specific Marketing:For Thread Rod products, pitch a dual-value proposition of "Tax Avoidance (Anti-dumping duty exemption) + Carbon Footprint Transparency"directly to major European distributors. Turn the tariff disadvantage of competitors into our profit margin.

  • CBAM Leadership:Transform carbon emission documentation into a formal Marketing Seal. Mark all product catalogs and the official website as "CBAM Ready"to proactively attract high-end European industrial clients sensitive to carbon credits, turning environmental compliance into a Green Premium.

4. Steel Wires Strands

Keep cultivating current customers and developing new customers.

Industry & Competition (Overall)

The competitive landscape and changing market factors affect the company's product sales each year.

Procurement of Products & Services

Reporting Mode

3117

Procurement (Overall)

The company has a continuous, vertical production line from upstream to downstream, therefore it sources raw materials exclusively at the upstream level, namely billets and wire rod.

Raw Material Acquisition (Overall)

Billet and wire rod

In 2025, TYCN's raw material sources will include countries such as China, Oman and Thailand. The proportion of raw material purchased will be 7% domestically and 93% internationally.

Production Policy (Overall)

Wire rods

  1. Billet inspection & conditioning line:

Billets, after being straightened, are loaded to be desalted by a shot blast, and transferred towards a fluorescent magnetic powder flow detector to be inspected and marked for defective parts on all four surfaces.

  1. Billet grinding:

Defects on surface of billets are removed by wheel grinding. Complete grinding produces a high-quality surface suitable for cold heading, cold forging, cold drawing, cold stranding, and other intensive processing works using billets as raw material.

  1. Reheating furnace:

Billets are charged into a reheating furnace to heat to the temperature required for rolling.

  1. Rolling line:

    Billet is discharged to the mill stand; the mill stand includes roughing mills, intermediate mills, and finishing mill totaling 18 rolling stands. After being rolled, the product is passed through bar reel in order to reel the product bar into coils. With the ventilation system, bar coils are force draft cooled to produce a finished product called “bar in coil"

  2. Convolution conveyor:

After finishing, the product is continuously rolled by 10 rolling stands of finishing block, a “loop layer” shapes the straight line product into circular convolutions, after which it is moved to a convolution conveyor, producing “wire rod coil”.

Annealed wire

1) Intermediate drawing: Wire rod is transformed into smaller wire. TYCN has 13 drawing machines for small size and 10 drawing machines for big size.

2)Spheroidized annealed: Wire from step 1 will be annealed through the spheroidized annealed machines. Currently, TYCN has 11 bases machines.

3)Pickling & coating: Wire will be surface cleaned using one operating line and coated with the rust proof solution as well as lubricants using one of 2 operating lines.

4)Skin pass: In the final stage, wires will pass through the skin pass drawing process.

TYCN currently has 24 skin pass machines.

Screws & Bolt

1)Heading and threading: Wire will be delivered to the forming plant, passing through the heading and threading machines.

2) Case hardens: After the forming process, screws are treated by carburization to improve their mechanical strength.

3) Plating: Surface finishing and coating is necessary for screws and bolt to for rustproofing and improve their appearance. The surface treatment processes vary depending on customer demand and include black phosphate, zinc electroplating (zinc blue, zinc yellow), dacrotized and Rusper coating for screws, zinc electroplating for bolt.

Number of Raw-Material Distributors (Overall)

4

Production Capacity (Overall)

ItemUnitUsedCapacity
Total production capacity of finished goods.Ton55.67546,000

Domestic/Overseas Purchase Proportion (Overall)

Raw MaterialSource CountryValue
Billet and Wire RodChina2,016,257,923.47
BilletOman1,424,479,048.12
BilletThailand295,267,775.2

Projects Under Construction

Has Projects Under Construction (Y/N)

No

Debentures & Bills of Exchange

Has Debentures (Y/N)

No

Convertible Securities

Has Convertible Securities (Y/N)

No

Contents